Choose the material of stainless steel joints according to 5 situations:
1. Type and temperature of the fluid (please select the quick connector suitable for the type and temperature of the body material and sealing material)
According to the fluid, suitable body material, sealing material is different. For example, the quick connector is air. Steel is recommended, brass or stainless steel for water.
2. Liquid pressure (please select a quick connector suitable for fluid pressure resistance)
The pressure of the fluid is also the key to select the quick joint. The quick connector for oil pressure is 5.0mpa (51kgf/cm²) 68.6 Mpa (700 KGF/cm&sup 2) The structure of the quick joints is also different according to the pressure resistance characteristics.
3, automatic switch valve structure (please select suitable for piping valve structure of quick connector)
For the construction of the valve, there are two - way switch, one - way switch and two - way open. In addition to the two - way switch during the separation, there is fluid flow from the distribution tube. So pay attention.
4. Use environment of quick connector (please select the structure and material suitable for the use environment)
In combination with the conditions of humidity and dust in the service environment, as well as the conditions of easy corrosion, etc., the type, bulk material and sealing material of selected quick joints are considered.
5. Shape and size of installation (please order the product after determining the final shape and size)
Please determine the type and material of the quick couplings and specify the assembly shape and size corresponding to the piping characteristics. Note that the dimensions are related to the flow rate.
